Broome & West Kimberley Mon–Fri 7am–5pm
📞 0433 519 685
Tiled alfresco area beside a Broome home

The best tiles for Broome's climate

Heat, humidity, UV, red pindan dust and wet-season downpours: Broome asks a lot of a tiled surface. Here's how to choose tiles that look good and last.

Start with porcelain

For most Broome homes, porcelain is the safest all-round choice. It's denser and less porous than ordinary ceramic, so it absorbs very little water, resists staining from red dust, and copes with the swings between dry-season heat and wet-season humidity. Glazed ceramic is fine for walls and splashbacks, but floors, wet areas and anything outside benefit from porcelain.

Slip resistance matters more than you think

Tiles in Australia are slip-rated under AS 4586, from P0 (very slippery) up to P5 (most grip). As a rule of thumb:

  • Living areas and hallways: P2–P3 is usually comfortable and easy to clean.
  • Bathroom floors and showers: P3 or higher, especially in showers.
  • Alfresco, patios, entries and pool surrounds: P4–P5, because sudden storms and wet feet are a fact of life in Broome.

A higher slip rating usually means more texture, which can hold dust. A mid-tone textured tile is a good balance between grip and easy cleaning.

Colour: think heat and pindan dust

Outdoors, lighter tiles stay noticeably cooler underfoot than dark ones in the Kimberley sun. Indoors and out, sandy, warm grey and mid-tone colours hide red dust far better than bright white or very dark tiles, which show every footprint.

Bigger tiles, fewer grout lines

Large-format tiles (600×600, 600×1200 and up) mean fewer grout lines to scrub, which is a real advantage when dust and humidity are working against you. They do need a flat substrate and careful levelling, so preparation is everything. Read more about our floor tiling.

Outdoor tiles and pool surrounds

For outdoor areas choose external-grade porcelain, either 20 mm pavers (great over sand and gravel) or 10 mm tiles laid on a concrete slab with flexible, exterior-rated adhesive. Allow for movement joints, since big temperature swings make tiles expand and contract. Around pools, look for salt-tolerant, cool-touch tiles with a P4–P5 rating. See outdoor and pool tiling.

Grout and sealing

In wet areas and outdoors, a high-performance or epoxy grout resists staining and mould far better than standard cement grout. Natural stone and some unglazed tiles need sealing; most glazed porcelain doesn't. Ask your tiler which applies to the tiles you've chosen.

Quick checklist

  • Porcelain for floors, wet areas and outdoors
  • Check the P-rating for where the tile is going
  • Mid-tones to hide pindan dust; lighter colours outside to stay cool
  • Large-format where the substrate allows
  • Exterior adhesive and movement joints outside

By Broome Tilers · Broome WA · Updated October 2026

Related services

How we can help

📞 Call nowFree quote